Spenstige tetningsventiler for setet

1.Introduksjon avSpenstige tetningsventiler for setet

Spenstige tetningsventiler for setet are also called lifting stem gate valves, also called rising stem gate valves. Usually there is a trapezoidal thread on the lifting rod, through the nut on the top of the valve and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is changed into operating thrust. The opening and closing part of Spenstige tetningsventiler for setet is a gate. The movement direction of the gate is perpendicular to the direction of the fluid. It can only be fully opened and closed, but cannot be adjusted or throttled. The Spenstige tetningsventiler for setet produced by Milestone Valve Company have stable performance and are used in various fields such as petroleum, chemical industry, and water conservancy.

2. Tekniske parametere forSpenstige tetningsventiler for setet

3.Key points of operation of Spenstige tetningsventiler for setet:

1) The opening and closing direction of Spenstige tetningsventiler for setet should always be closed clockwise.
2. Pneumatic valves in the Spenstige tetningsventiler for setet pipe network are often opened and closed manually, and the number of opening and closing revolutions should not be too much, that is, large-diameter valves should also be within 200-600 revolutions.
3) Spenstige tetningsventiler for setet In order to facilitate the opening and closing operation of one person, the larger opening and closing torque should be 240N-m under the pressure of the pipeline.
4) The opening and closing end of Spenstige tetningsventiler for setet should be a square tenon, with standardized dimensions, and face the ground so that people can directly operate it from the ground. Valves with roulette are not suitable for underground pipe networks.

4. Emballasje og levering

5. FAQ

1. Kan jeg få en prøveordre på ventilen?
A: Ja, vi tar gjerne imot prøveordre for å teste og kontrollere kvaliteten, blandet prøve godtas.
2. Har du noen MOQ-grense for ventilbestilling?
A: Lav MOQ, 1 PC for prøvekontroll er tilgjengelig.
3. Kan du tilby OEM-service?
A: Ja, OEM er tilgjengelig.
4. Hva med betalingen?
A: Vi godtar normalt et depositum på 30%, og balansen betales før frakt. L7C er OK
5. Hva leverer sommerfuglventilene dine?
A: For de fleste størrelsene, DN50-DN600, har vi lager av ventildeler, det er mulig å levere i løpet av 1-3 uker, til nærmeste havneby Tianjin.
6. Klarer garantien for produktene dine?
Svar: Vi tilbyr normalt 12 måneders garanti i drift eller 18 måneder siden leveringsdato.
7. Hva er produktstandardiseringen din?
A: GB / T12238-2008, JBfT 8527-1997, API 609, EN 593-1998, DIN 85003-3-1997

6.Kontaktinformasjon